Beurer LB 50 Manual do Utilizador descarregar pdf (Página 20)

² If there is any water left in the appliance, pour it out.

² Use a new pad [4].

² Wash out the new pad [4] with clean water and put in the hotwater chamber.

Descaling the appliance

Descale the humidifier

• Never try to remove any limescale deposit with pointed or sharp

objects. This might damage the humidifier or cause it to leak.

• You should also note the manufacturer's advice for the descaling agent

which you are using.

² Use a standard commercial descaling agent.

² Fill the hotwater chamber up to the brim with descaling solution.

² Leave the descaling solution to work until the limescale has dissolved.

² Pour away the descaling solution. Tip the appliance sideways to remove the

descaling solution.

² Rinse out the appliance thoroughly with clean water.

After cleaning and descaling

Insert the pad

² Put the cleaned pad or replacement pad [4] into the hotwater chamber.

Assemble the appliance

² Put the steam tower [3] back into the humidifier. Press the steam nozzle [2] into

the opening at the top of the steam tower [3].

² Screw the tank catch [9] onto the water tank [8]. Place the water tank [8] in the

humidifier.

² Place the cover [1] on top of the humidifier.

Cleaning the air filter

We recommend cleaning the air filter every week.

² Turn the humidifier so that the air filter flap [11] at the back of the appliance is

facing you. Undo the catch on the flap and remove the air filter flap [11].

² Remove the black air filter [12] and rinse it thoroughly with clean water.

² Once the filter is dry you can reassemble the air filter. Insert the black air filter [12]

inside the air filter flap [11].

² Insert the two small hooks of the air filter flap [11] into the right of the air filter

opening. Press the filter flap firmly until it clicks into place.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 83 84

Sem comentários

Beurer LB 50 Manual do Utilizador Página 20